The A510 Heavy Duty AC Drive is an easily configured versatile drive product that will control all general applications such as fans, pumps, conveyors, and mixers.
UL Approved No. E84757 (CSA Approved No. LR64671)
Suitable for Class I, Class II, Division I, Group D, E, F, G
Design Standards: UL 674; NEMA MG‐1, MG‐13; CSA 22.2 No. 145 Stator Insulation:
Class F insulation, 1.15 SF.
Rugged Cast Iron Construction.
Performance Data per ANSI‐IEEE standard 112 Method B
Non‐sparking external fans, non‐sparking brass flingers on both ends
Oversized Cast Iron conduit box
Non‐hygroscopic insulation system.
The TECO Low Voltage range of motors is available in voltages up to 1kV, multiple enclosure types such as Totally Enclosed Fan Cooled (TEFC), Open Drip Proof (ODP).
The TECO Low Voltage range of motors is available in voltages up to 1kV, multiple enclosure types such as Totally Enclosed Fan Cooled (TEFC), Open Drip Proof (ODP).
Features: High Torque Heavy Duty Over-sized Ball Bearing and Terminal Box Rugged Cast Iron Frame 90S through 132M Class F Insulation. Zn-Cd Plated Hardware. Ground Terminals. Condensate Drains. Capacitor-Start Capacitor Run
Apco regenerative turbine pumps are field-proven throughout the world. Apco pumps are ideal forhandling: (1) high head/low flow requirements, (2) liquids entrained with gases and vapors (up to 20%), and (3) constant flows. You are assured of reliable pumping service because every Apco is tested to insure consistent performance. Apco pumps are designed for those special applications where high head and low flow are required by the system. Boiler feed systems, for example, require high pressure to get low flows of water into the pressurized steam boiler.
Coarse bubble diffusers produce 1/4 to 1/2 inch (6.4 to 13 mm) bubbles which rise rapidly from the floor of a wastewater treatment plant or sewage treatment plant tank
